10瓦级双包层光纤激光器

考虑到所用大功率激光二极管的光谱特性，对光纤激光器的基本法布里-珀罗腔型稍加改变，研制出激光二极管抽运的10w级双包层光纤激光器，获得最高功率为11．8w、波长1100mm的单模激光输出。     

化学非平衡夸克-胶子物质中等质量双轻子的产生

研究了正在进行化学平衡的富重子夸克-胶子物质的双轻子产生，发现由于产生在RHIC能量 的化学非平衡的富重子夸克-胶子物质冷却慢和高的初始温度，导致中等质量双轻子产生重 大增强.因此，中等质量双轻子的增强可以是夸克-胶子物质形成的信号.同时，这个增强能 补偿由于初始夸克化学势增加引起的双轻子抑制，因而双轻子产额的抑制不再是夸克-胶子 物质产生的信号. 关键词： 化学非平衡夸克-胶子物质 热粲夸克 双轻子     

水汽在淀积金属钠的InP(111)表面的吸附

用UPS和HREELS研究室温下水汽在清洁的和淀积了金属钠的InP(111)表面的吸附。表面淀积了0.3单层金属钠之后,水汽在InP(111)表面的粘附系数显著增加,推测其原因可能与钠原子和表面的磷原子间的电荷转移有关。水汽主要以不分解的分子态形式吸附在表面。在HREELS谱中观察到与P—H键有关的282meV能量损失峰,表明部分水汽可能与淀积在表面的钠原子发生反应或者在表面发生分解。 关键词：     

KrVI离子能级和振子强度的理论计算

利用组态相互作用理论和参数外推法,计算了KrVI离子4s~24p—4s4p~2、4s~24p—4s~24d和4s4p~2—4p~3跃迁的能级、谱线波长和振子强度。与已有实验结果比较表明:波长的理论计算值与观测值在0.7A内很好符合,振子强度的理论计算值较大的跃迁均是实验中观测到的跃迁。     

Synthesis, Crystal Structure and Electrochemical Properties of a Novel Phenothiazine Derivative

A new compound 1,1‘-bis(3-pyridyl)-propylene(3,7-diformyl-N-ethylphenothiazinyl)ketone (C30H23N3O2S, Mr = 489.4) has been synthesized, and its crystal structure was determined by single-crystal X-ray diffraction method. The crystal is of orthorhombic, space group Ima2 with a = 27.491 (5), b = 11.942(2), c = 7.389(2) A, V = 2425.8(7) A^3, Z = 8, Dc =1.340 g/cm^3,μ = 0,167 mm ^1, F(000) = 1024, the final R = 0.0363 and wR = 0.0869 for 2054 unique reflections with Rint = 0.0254. The structural determination shows that the molecule assumes a butterfly configuration with nearly planar wings. In addition, the electrochemical study indicates that there is a high electronic delocalization in the molecule.     

关于均值KIRCHHOFF板非线性边界镇定问题的几点注记

对于均值K IRCHHOFF板非线性边界镇定问题给出几点注记.首先应用G reen公式对具有非线性边界反馈控制的均值K IRCHHOFF板所决定的非线性系统的能量衰减速度进行了重新推导,从而修正了前人的结果.然后应用极大单调函数的定义和分部积分技巧,对均值K IRCHHOFF板非线性边界镇定问题所决定的非线性算子A的极大单调性给出了重新证明,进而更正了已有文献中相应证明的欠妥之处.     

Tetrabutylammonium bromide/thenoyltri-fluoroacetone/mibk extraction for aas determination of cobalt, nickel, and manganese in copper ores and concentrates

An extraction-AAS method of determination of Co, Ni, and Mn in metallurgical copper materials containing considerable amounts ofCu, Fe, Pb, Zn, and Al has been developed. Good selectivity of group separation of Co, Ni, and Mn has been achieved by (a) the use of tetrabutylammonium bromide to improve extractability of HTTA complexes by ion-pair formation, and (b) the masking of major elements with sodium thiosulphate and sulphosalicylic acid. The extracts are stable for at least 3 weeks.     

Spectroscopic investigation of the adsorption and oxidation of thiourea on polycrystalline Au and Au(111) in acidic media

In the present paper, a systematic electrochemical investigation on thiourea (TU) electrooxidation was developed on polycrystalline and (111) single-crystal gold electrodes in 0.1 M perchloric acid. The combination of cyclic voltammetry with in situ Fourier transform infrared spectroscopy (FTIRS) and differential electrochemical mass spectrometry techniques have allowed the nature of the species formed during the electroadsorption and electrooxidation of TU to be established. FTIRS experiments were performed in D2O to clean up the region of the H2O bending around 1600 cm(-1). It was concluded that TU adsorbs tilted on the surface in the 0.05-0.40 VRHE potential range. A dual-path reaction mechanism was evidenced in the oxidation process. The first pathway takes place from adsorbed TU at E > 0.40 VRHE and implies the formation of [Au(I)-(TU)2]+, which is oxidized to NH2CN and S0 at E > 0.80 VRHE. In a following oxidation step at E > 1.20 V, N2, CO2, and HSO4-/SO4(2-) were produced. The second parallel reaction occurs from TU in solution at E > 0.50 VRHE to form (TU)2(2+). All these species were characterized from the spectroscopic experiments. Similar results were obtained for both surfaces.     

Use of highly efficient Draper-Lin small composite designs in the formal optimisation of both operational and chemical crucial variables affecting a FIA-chemiluminescence detection system

A new formal strategy in the multidimensional optimisation of the experimental variables affecting the chemiluminescence (CL) detection in flow injection analysis (FIA) is proposed here. The strategy implies several steps, being the most significant: selection of the variables to be studied and their experimental domain; use of a screening design to detect significant variables and interactions into the experimental region; study of the main effect of variables and second-order interactions; and finally application of a Draper-Lin small composite design (orthogonal) to obtain the optimum values of the significant variables. The methodology is applied to the determination of methylamine by FIA based on the use of the peroxyoxalate CL (PO-CL) reaction. Considering the high number of experiments required due to the different chemical and instrumental variables to be taken account and their adequate compatibility to obtain maximum sensitivity, the methodology offers a rigorous study of the main effects and interactions, achieving a reduction of experimental work.